1. Enter programming mode by pressing "PROGRAM" button then "STAR" button twice, followed by 1, 2, 3, 4

2. Enter program "000" and press Enter

3. Press "SPEAKER" button two times, you will see the time.

4. Enter the correct hour.

5. Press "FORWARD/DND" button to advance to the minute selection

6. Enter the correct minutes (if necessary to update).

7. Press "FORWARD/DND" button to advance to the AM/PM selection.

8. Press "MUTE" button to select AM or PM (if necessary to change).

9. Press "STORE" button

10. Lift and replace handset to exit the programming mode.

11. This will change the time for all of the phones on your phone.

1. Press Feature ** TIME (8463)

2. Display shows Time 16:24

3. On the Softkey under the display it says CHANGE If you wish to change the time, press CHANGE, if not press NEXT

4. Once you pressed the CHANGE button the hour displays

5. If you wish to change the hour, press CHANGE,

6. if not press NEXT

7. Once you pressed the CHANGE button the hour is erased allowing you to enter the new time - enter the new hour

8. in 24 hour format, when OK press NEXT

9. Once you pressed the NEXT button the minutes display

10. If you wish to change the minutes, press CHANGE,

11. if not press NEXT

12. Once you pressed the CHANGE button the minutes are

13. erased allowing you to enter the new time - enter the new minutes, when OK press NEXT

Follow the same procedure for changing the date!

1. Press the "PROGRAM" button on the face of the phone

2. Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234)

3. Enter program # 000

4. Press "SPEAKER" button

5. Press "FORWARD/DND" button to change to the hour selection

6. Press "TRANSFER" button and enter the hour

7. Press "FORWARD/DND" button to change to the minute's parameter

8. Press "TRANSFER" button and enter the minutes

9. Press "FORWARD/DND" button to change to the AM/PM parameter

10. Press "MUTE" button to select AM or PM

11. Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed)

12. Press "HOLD" button13. Press the "PROGRAM" button on the face of the phone